Lucet patterns

While doing some research on making friendship bracelets I ran across a link for making cordage with a lucet. I have done this in the past and still have a small lucet. I did not find many patterns to cut a lucet so I made some up for the public at large.
What is a lucet you say? It is a wood, bone, plastic forked tool to make decorative cord, for clothes for decoration, to use an bracelets, etc.

You will need to click the image to get a full size picture to print. I put a few measurements on the image to help you size it as needed.

Scarf Joint Neck Jig

This is a simple jig for a Skil saw to make a scarf joint for a cigar box guitar neck. I have access to a chop saw but it would not cut a lower angle than about 30 degrees and I do not currently have the space for a table saw. Works great!

The top:


The bottom:


Here's a shot with a 1"x2"x3' poplar stick in position. The stick has not been measured yet it is just in place to show where it goes.

Cigar Box Guitar

Here are some pictures of my second CBG. I built it sometime late last year.